Payment & Shipping Terms:
|Style:||Floor Standing||Warranty:||18 Month|
|Cooling System:||Compressor Cooling||Cooling Power:||85W|
|Heating Power:||550W||Material:||ABS, Cold Rolled Steel|
bottom load hot and cold water dispenser,
hot and cold bottom loading bottled water dispenser
Compressor cooling bottom loading water dispenser hot and cold water stainless steel piping
Description of our products
1) standing NEW model, elegant, innovative
2) Cooling system: compressor cooling
3) Cabinet for storing 5 gallon bottles
4) Housing material: ABS& cold rolled steel
5) Available with white or silver colour
6) Left tap for hot water, right tap for cold water
7) Inner vessel made of stainless steel
8) Strong refrigeration, low noise and long service life
9) Manufactured using national food grade materials
1) Rated voltage: 220 - 240V / 110-127V
2) Rated frequency: 50Hz / 60Hz
3) Input heating power: 550W
4) Input cooling power: 85W
5) Hot water-making capacity: 85-95°C, 5L/h
6) Cold water-making capacity: 6-10°C, 2L/h
7) Refrigerant: R134a
Competitive advantages of our products.
1. Beautiful shape, luxurious and elegant appearance.
2. Low noise, power saving, long life, safety and hygiene and so on.
3. Works at high thermal efficiency.
4. This product is capable of serving hot & cold water all day long, which could be used for tea, instant coffee and other needs for families.
5. It can be used in a variety of public places. home and office use compressor cooling stainless tank standing water dispenser
6. The stainless steel series products are hygienic and durable.
1. Use drinking water only.
2. Keep the condenser free from dirt and dust.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. Children should be supervised to ensure that they do not play with the appliance.
6. Do not make any changes or damage to the cooling system. Any changes or maintenance to the cooling system should be done by qualified organization.
6. Do not tilt the dispenser more than 45 degrees or you may damage the compressor.
7. The unit is equipped with a grounded plug. Do not alter or change the plug in any way.
8. Never turn on heating switch when there is no water.
9. Hot water is hot enough to cause injuries. Please keep your children away from the hot water faucet.
10. Please turn off the power switch when stopping using it..
|MODEL NO.||YLRS-V2(2 taps)|
|Product Feature||Hot&Cold, Floor Standing Water Dispenser, Bottom loading bottles, with child-lock for hot water|
|Product Specification||Water contact ways are SUS 304: SUS 304 Tank, Stainless Steel pipe connection|
|Power Supply||AC 220-240V/50-60HZ|
|Water level control||Good quality float to control the water level inside cold tank|
|Pump||Excellet quality for the pump, to work when the water fills into the cold tank|
|Power Consumption||Cold: 90W, Hot: 500W|
|Cooling System||Compressor cooling|
|Volume of Tank||3.2L|
|Heater Type||Inner Heater|
|Tank Type||Weld Tank|
|Temp Control||Bimetal Thermostat|
|Volume of Tank||1 Liter|
|Colours Available||White&Blue decoration/Silver black|
|Product Boxed Weight||15KGS|
|Product Boxed Dimension||39X36X105CM|
Q1: No hot or cold water
A1: Over consumption of hot or cold water in short time
Solution: Just wait a moment, then hot or cold water is available again
A2: No power supply
Solution: Connect plug to socket. Turn on heating or cooling switch
Q2: No water running out from taps
A1: Empty bottle
Solution: Replace it with another bottle.
A2: Inlet of bottle supporter blocked by bottle seal
Solution: Clean out wasted paper& bottle seal, install bottle again.
Q3: Leakage from bottle supporter
A: Broken bottle
Solution: Replace it with a new bottle
Q4: Noisy operation
A: Not placid installation
Solution: Replace the machine on placid& solid surface.
How to Contact us
Contact Person: Joyce